Offset Occurs; Image Is Partly Missing; Fusing Is Poor; Image Is Out Of Focus - Kyocera TASKalfa 220 Service Manual

2KL/2KK

(14) Offset occurs.

Copy example
Defective cleaning blade.
Defective fuser unit.
Wrong types of paper.

(15) Image is partly missing.

Copy example
Paper damp.
Paper creased.
Dirty or flawed drum.
Dirty transfer roller.

(16) Fusing is poor.

Copy example
Wrong types of paper.
Defective pressure springs.
Flawed press roller.
Flawed fuser heater.

(17) Image is out of focus.

Copy example
Defective image scanning unit.
Drum condensation.
1-4-26
Causes
Causes
Causes
Causes
Check procedures/corrective measures
Replace the drum unit (see page 1-5-34).
Check the heat roller and press roller.
Check if the paper meets specifications. Replace paper.
Check procedures/corrective measures
Check the paper storage conditions.
Change the paper.
Clean the drum or, if it is flawed, replace the drum unit (see
page 1-5-34).
Clean the transfer roller.
Check procedures/corrective measures
Check if the paper meets specifications. Replace paper.
Replace the pressure springs.
Replace the press roller (see page 1-5-42).
Replace the fuser heaters (see page 1-5-44).
Check procedures/corrective measures
Replace the image scanning unit (see page 1-5-26).
Clean the drum.