Kyocera TASKalfa 220 Service Manual page 160

2KL/2KK
7. Remove two films from the scanner unit.
8. Move the mirror 1 frame to notch position.
When moving the mirror 1 frame, do not
touch the exposure lamp and the inverter
PWB.
9. Remove the connector of the exposure lamp
from inverter PWB and remove the lamp
wire from ribs.
10. Remove two screws and remove the expo-
sure lamp.
11. Replace the exposure lamp and refit all the
removed parts.
1-5-18
Film
Mirror 1 frame
Figure 1-5-29
Connector
Lamp wire
Figure 1-5-30
Screw
Exposure lamp
Figure 1-5-31
Film
Inverter PWB
Screw