Installing The Key Counter (Option) - Kyocera TASKalfa 220 Service Manual

1-2-3

Installing the key counter (option)

Installing the key counter requires the following component:
Key counter (P/N 3025418011)
Key counter set (P/N 302A369708)
Key counter wire set (P/N 302KK94590)
Key counter mounting plate (P/N 2C960100)
Supplied parts of key counter set:
Key counter socket assembly (P/N 3029236241)
Key counter cover (P/N 3066060011)
Key counter mount (P/N 3066060041)
Key counter retainer (P/N 302GR03020)
Key counter cover retainer (P/N 302GR03010)
Two (2) Edgings (P/N 7YZM210006++H01)
One (1) Band (P/N M21AH010)
One (1) M3 × 8 tap-tight P screw (P/N 5MBTPB3008PW++R)
Two (2) M4 × 10 tap-tight P screws (P/N 5MBTPB4010PW++R)
Two (2) M4 × 10 tap-tight S screws (P/N 5MBTPB4010TW++R)
Two (2) M3 × 6 bronze flat-head screws (P/N 7BB003306H)
One (1) M4 × 20 tap-tight S screw (P/N 7BB100420H)
One (1) M3 bronze nut (P/N 7BC1003055++H01)
One (1) M3 × 8 bronze binding screw (P/N B1B03080)
One (1) M4 × 30 tap-tight S screw (P/N B1B54300)
Five (5) M4 × 6 chrome TP screws (P/N B4A04060)
Two (2) M4 × 10 chrome TP screws (P/N B4A04100)
Supplied parts of key counter wire set:
Key counter wire (P/N 302KK46300)
One (1) Wire saddle RLWC-1SV (P/N 7YZM610001++H01)
One (1) Wire saddle RLWT-0.5V (P/N 7YZM610009++H01)
One (1) Edging (P/N 7YZM210003++H01)
Procedure
1. Turn the main power switch off and unplug
the power cable from the wall outlet.
2. Fit the key counter socket assembly to the
key counter retainer using two screws and
nut.
3. Fit the key counter mount to the key counter
cover using two screws.
4. Fit the key counter retainer to the key
counter mount using two screws.
Key counter retainer
M4 x 6 screw
(302GR03020)
(B4A04060)
M3 nut
(7BC1003055++H01)
M4 x 6 screw
(B4A04060)
Key counter
socket assembly
M3 x 6 flat-head
(3029236241)
screws
(7BB003306H)
M4 x 6 screw
(B4A04060)
Key counter
mount
(3066060041)
M4 x 6 screw
(B4A04060)
Key counter cover
(3066060011)
Figure 1-2-13
2KL/2KK-1
1-2-11