Detaching And Refitting The Press Roller - Kyocera TASKalfa 220 Service Manual

2KL/2KK

(2) Detaching and refitting the press roller

Follow the procedure below to replace the press roller.
Procedure
1. Remove the fuser unit (see page 1-5-40).
2. Remove two screws and open the fuser unit.
3. Separate the right and left fuser unit.
4. Remove the screw and release two hooks
and then remove the press roller guide from
the left fuser unit.
1-5-42
Screw
Right fuser unit
Figure 1-5-69
Hook
Left fuser unit
Screw
Figure 1-5-70
Screw
Fuser unit
Left fuser unit
Press roller guide
Hook