2KL/2KK
1-5-6
Transfer section
(1) Detaching and refitting the transfer roller
Follow the procedure below to replace the transfer roller.
Procedure
1. Remove the paper conveying unit (see page
1-5-9).
2. Remove front and rear inserted parts and
remove the transfer roller unit from the
paper conveying unit.
3. Remove two collars A, two collars B, gear,
two stoppers and two bushes from transfer
roller.
1-5-38
Transfer roller unit
Paper conveying unit
Inserted part
Figure 1-5-63
Collar B
Collar A
Gear
Stopper
Bush
Figure 1-5-64
Bush
Transfer roller
Stopper
Collar B
Collar A