Detaching And Refitting The Right Registration Roller - Kyocera TASKalfa 220 Service Manual

(6) Detaching and refitting the right registration roller

Follow the procedure below to replace the right registration roller.
Procedure
1. Remove the drum unit (see page 1-5-34).
2. Remove the rear cover (see page 1-5-6).
3. Remove the connector and remove the reg-
istration clutch.
4. Remove the stop ring.
5. Remove the right registration roller from the
machine.
Registration clutch
Figure 1-5-24
Stop ring
Right registration roller
Figure 1-5-25
2KL/2KK
1-5-15