Detaching And Refitting The Laser Scanner Unit - Kyocera TASKalfa 220 Service Manual

2KL/2KK

(4) Detaching and refitting the laser scanner unit

Follow the procedure below to replace the laser scanner unit.
Procedure
1. Remove the original cover or the document
processor.
2. Remove the rear cover (see page 1-5-6).
Remove the front left cover (see page 1-5-
40).
Remove the right upper cover, contact
glass, rear upper cover and front scanner
cover (see page 1-5-17).
Remove the left middle cover, left upper
cover and slit glass (see page 1-5-19).
Remove the right middle cover (see page 1-
5-22).
3. Remove the screw and release three hooks
and then remove the front right cover.
1-5-28
Screw
Front right cover
Hook
Hook
Figure 1-5-48
Front right
cover
Hook