Kyocera TASKalfa 220 Service Manual page 107

Margin shift
Sets the default setting of the margin width for the mar-
gin copying.
1. Press margin key for 3 s.
2. Select [43.Stitch Width] and press the OK key.
3. Select the setting and press the OK key.
Setting range: 1 to 18 mm/0.13" to 0,75"
Border width
Sets the default setting of the border width for the bor-
der erase mode.
1. Press border erase key for 3 s.
2. Select [44.Border Erase] and press the OK key.
3. Select the setting and press the OK key.
Setting range: 1 to 18 mm/0.13" to 0,75"
4 in 1 layout order
Sets the layout for the order in which the originals will
appear in the 4 in 1 layout mode.
1. Press combine key for 3 s.
2. Select [45.4 in 1 Layout] and press the OK key.
3. Select the setting and press the OK key.
Portrait 1/Portrait 2/Landscape 1/Landscape 2
Combine mode borderline
Selects the type of borderline to be used in the layout
mode.
1. Press combine key for 3 s.
2. Select [46.Combine Border] and press the OK key.
3. Select the [Off], [Solid] or [Dotted] and press the OK
key.
Rotate collate setting
Sets whether or not to perform rotate sorting when the
sort mode is selected.
1. Press both of the density adjustment keys for 3 s.
2. Select [47.Rotate/Offset] and press the OK key.
3. Select [On] or [Off] and press the OK key.
Selecting auto rotation
Sets whether the automatic rotation by default.
1. Press both of the density adjustment keys for 3 s.
2. Select [48.Auto Rotation] and press the OK key.
3. Select [On] or [Off] and press the OK key.
Silent mode transition time
Set the silent mode transition time after copying.
1. Press both of the density adjustment keys for 3 s.
2. Select [49.Silent mode] and press the OK key.
3. Select the setting and press the OK key.
0 sec/5 sec/10 sec/15 sec/30 sec
Auto clear setting
Sets whether the auto clear function is available.
1. Press both of the density adjustment keys for 3 s.
2. Select [50.Auto Clear] and press the OK key.
3. Select [On] or [Off] and press the OK key.
Auto sleep setting
Sets whether the auto off function is available.
1. Press both of the density adjustment keys for 3 s.
2. Select [51.Auto Sleep] and press the OK key.
3. Select [On] or [Off] and press the OK key.
Auto clear time
Sets the auto clear time.
1. Press both of the density adjustment keys for 3 s.
2. Select [52.AutoClearTime] and press the OK key.
3. Select the setting and press the OK key.
Setting range: 10 to 270 sec
Low power mode transition time
Sets the auto preheat time.
1. Press both of the density adjustment keys for 3 s.
2. Select [53.LowPower Time] and press the OK key.
3. Select the setting and press the OK key.
1 min/5 min/15 min/30 min/45 min/60 min/90 min/
120 min/180 min/240 min
Sleep mode transition time
Sets the auto shutoff time.
1. Press both of the density adjustment keys for 3 s.
2. Select [54.AutoSleep Time] and press the OK key.
3. Select the setting and press the OK key.
1 min/5 min/15 min/30 min/45 min/60 min/90 min/
120 min/180 min/240 min
Alarm
The alarm can be set to sound when errors occur.
1. Press both of the density adjustment keys for 3 s.
2. Select [55.Alarm] and press the OK key.
3. Select [On] or [Off] and press the OK key.
Digital dot coverage report
Prints out a report that shows the number of copies
made and the blackness ratio for each paper size.
1. Press both of the density adjustment keys for 3 s.
2. Select [56.CoverageRepo] and press the OK key.
Check to make sure that A4/Letter size paper is
loaded in the cassette.
3. Select [YES] and press the OK key.
Report is printed out
2KL/2KK
1-3-69