Detaching And Refitting The Fuser Unit; Fuser Section - Kyocera TASKalfa 220 Service Manual

2KL/2KK
1-5-7

Fuser section

Caution

(1) Detaching and refitting the fuser unit

Follow the procedure below to check or replace the fuser unit.
Procedure
1. Open the front cover and left cover.
2. Remove the screw and release three
inserted parts and then remove the front left
cover.
3. Remove the screw and two connectors and
then remove the fuser unit.
1-5-40
Front left cover
Inserted part
Screw
Figure 1-5-66
Fuser unit
Figure 1-5-67
Inserted part
Connectors
Screw