Kyocera TASKalfa 220 Service Manual page 167

16. Remove two scanner wire stoppers and
frame securing tools.
17. Focusing on the locating ball of the wire
drum, move aside the wires to inside.
18. Move the mirror 2 frame from side to side to
correctly locate the wires in position.
19. Put the mirror 1 frame on the scanner rail
and move it toward the left side of the
machine.
20. Insert the frame securing tools into the posi-
tioning holes (leftmost holes) at the front and
rear of the scanner unit and screw the mirror
1 frame while securing both the mirror 1
frame and the mirror 2 frame.
21. Remove two frame securing tools.
22. Refit all the removed parts.
Frame securing tool
Mirror 1 frame
Figure 1-5-44
2KL/2KK
Frame securing tool
Mirror 2 frame
1-5-25