Transfer/Separation Section; Detaching And Refitting The Transfer Roller Unit - Kyocera TASKalfa 3510i Service Manual

1-5-6 Transfer/separation section

(1) Detaching and refitting the transfer roller unit

Procedures
1. Open the right cover 1.
(See page 1-5-10)
2. Release two lock levers and then
remove the transfer roller unit.
3. Check or replace the transfer roller unit
and refit all the removed parts.
4. When replacing the new unit,proceed
as follows:
1)Performs maintenance mode U127
(Clear Transfer Roller Counter) (see
page ).
2)Performs maintenance mode U410
(Adjusting the halftone automatically)
(see page 1-3-118).
CAUTION: Inserting the transfer roller
unit in place until it click in,when refitting
the transfer roller unit.
Lock lever
Figure 1-5-28
1-5-17
2NL/2P8
Lock lever
Transfer
roller unit