Ipv6 Neighbour - Draytek Vigor2130 Series User Manual

Expires
MTU
Advmss
Hoplimit
Auto-refresh
4 . 1 2 . 5 I P v 6 N e i g h
4 . 1 2 . 5 I P v 6 N e i g h
IPv6 uses neighbor discovery protocol to find out neighbors on the same link.
Device
IP Address
MAC Address
State
Auto-refresh
Display the lifetime of the route.
Display t
Display t
piece of a routing advertisement.
Display t
packet is allowed to travel before discarded.
Check this box to enable an automatic refresh of the page at
regular intervals.
b o u r
b o u r
The interface name of the link where the neighbor is on.
The IPv6 address of the neighbor.
The link-layer address of the neighbor.
Possible states include:
incomplete - address resolution is in progress.
reachable - neighbor is reachable.
stale – neighbor(s) may be unreachable but not verified
until a packet is sent).
delay - neighbor may be unreachable and a packet was sent.
probe - neighbor may be unreachable and probes are sent to
verify the reachability.
Check this box to enable an automatic refresh of the page at
regular intervals.
he largest size (in bytes) of a packet.
he largest size (in bytes) of an unfragmented
he number of network segments on which the
198
Vigor2130 Series User's Guide