Lan Status; Wan Status - Draytek Vigor2100 Series User Manual

Residential broadband router
Hide thumbs Also See for Vigor2100 Series:
Table of Contents

Advertisement

2.2.2 LAN Status

IP Address
IP address of the LAN interface.
TX Packets
Total number of transmitted IP packets since the router was powered
on.
RX Packets
Total number of received IP packets since the router was powered
on.
Primary DNS
You must specify DNS server IP address here if your ISP has the
said address. If you do not specify it, the router will automatically
apply default DNS Server IP address: 194.109.6.66 to this field.
Secondary
You must specify secondary DNS server IP address here if your ISP
DNS
has the said address. If you do not specify it, the router will
automatically apply default secondary DNS Server IP address:
194.98.0.1 to this field.

2.2.3 WAN Status

Mode
Indicate which broadband access mode is active. Depending upon
the access mode, you may see PPPoE, PPTP, PPPoA, or Static IP
or DHCP.
GW IP Addr
The gateway IP address.
IP Address
IP address of the WAN interface.
TX Packets
Total number of transmitted IP packets during this connection
session.
TX Rate
Transmission rate in characters per second (cps) for outgoing data.
RX Packets
Total number of received IP packets during this connection session.
RX Rate
Reception rate in characters per second (cps) for incoming data.
Up Time
Connection time. The format is HH:MM:SS, where HH, MM, and SS,
indicate hours, minutes, and seconds, respectively.
Drop/Dial
Click the link to dial/or disconnect the PPPoE or PPTP connection.
PPPoE or
PPTP
Online Status
2-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vigor2100gVigor2100vVigor2100vg

Table of Contents