System Status; Lan Status; Wan Status - Draytek Vigor2500V Manual

One may find that the Online Status page contains three basic subgroups.
That is, System Status, LAN Status, WAN Status, and ADSL Information.
However, for the ISDN model, the Online Status page also displays the
status of ISDN connection.

2.2.1 System Status

System Uptime: This represents the router's running time. The format
is HH:MM:SS, where HH, MM, and SS, indicate hours, minutes, and
seconds, respectively.

2.2.2 LAN Status

IP Address: IP address of the LAN interface.
TX Packets: Total number of transmitted IP packets since the router
was powered on.
RX Packets: Total number of received IP packets since the router was
powered on.

2.2.3 WAN Status

Mode: Indicate which ADSL access mode is active. Depending upon
the ADSL access mode, you may see PPPoE, PPPoA, or MPoA.
GW IP Addr: The gateway IP address.
IP Address: IP address of the WAN interface.
TX Packets: Total number of transmitted IP packets during this
connection session.
TX Rate: Transmission rate in characters per second (cps) for
Online Status
2-2