Table of Contents
Advertisement
Chapter 2 - CLI Commands
fast authentication
Supported on: Wi² AP
fast authentication
Enables WPA2 opportunistic key caching.
no fast authentication
Disables WPA2 opportunistic key caching.
layer3 mobility
Supported on: Wi² AP
layer3 mobility
Enables Layer 3 mobility.
no layer3 mobility
Disables Layer 3 mobility.
beacon transmit power
Supported on: Wi² AP
beacon transmit power
Advertise the current transmit power setting in the beacon.
no beacon transmit power
Do not advertise the current transmit power setting in the beacon.
data rate maximum
Supported on: Wi² AP
data rate maximum (1 | 2 | 5.5 | 6 | 9 | 11 | 12 | 18 | 24 | 36 | 48
| 54 | highest)
Sets the maximum transmission rate that clients stations must respect in
order to connect with this SSID. Clients stations that attempt to associate at
a higher data rate will be refused. Select the Highest option to have the Wi²
AP automatically adjust the data rate to its maximum setting based on the
wirelessmode being used.
data rate minimum
Supported on: Wi² AP
data rate minimum (lowest | 1 | 2 | 5.5 | 6 | 9 | 11 | 12 | 18 | 24
| 36 | 48 | 54)
Sets the minimum transmission rate that clients stations must meet in
order to connect with this SSID. Client stations that are below this setting
will not be able to connect to this SSID. Set the Lowest option to have the
Wi² AP automatically adjust the data rate to its minimum setting based on
the wirelessmode being used.
74
Wi² AP CLI Reference Guide
Advertisement
Table of Contents
