Table of Contents
Advertisement
Chapter 2 - CLI Commands
snmp-server trap low-snr level
Supported on: Wi² AP
snmp-server trap low-snr level <number>
Sets the SNR level that will trigger a trap.
snmp-server trap new-association
Supported on: Wi² AP
snmp-server trap new-association
Send trap on when a new wireless client station associates with any VAP
(VSC).
no snmp-server trap new-association
Do not send this trap.
snmp-server trap new-association interval
Supported on: Wi² AP
snmp-server trap new-association interval <number>
Interval, in minutes, between notifications.
snmp-server trap vpn-connection
Supported on: Wi² AP
snmp-server trap vpn-connection
Send a trap when a customer establishes a VPN connection with the Wi² AP.
no snmp-server trap vpn-connection
Do not send this trap.
snmp-server trap wireless-association-fail
Supported on: Wi² AP
snmp-server trap wireless-association-fail
Send a trap when a wireless client station fails to associate with the Wi² AP.
no snmp-server trap wireless-association-fail
Do not send this trap.
snmp-server trap wireless-association-success
Supported on: Wi² AP
snmp-server trap wireless-association-success
Send a trap when a wireless client station successfully associates with the
Wi² AP.
no snmp-server trap wireless-association-success
Do not send this trap.
38
Wi² AP CLI Reference Guide
Advertisement
Table of Contents
