Chapter 2 - CLI Commands
snmp-server version
Supported on: Wi² AP
snmp-server version (1 | 2c)
Sets the SNMP version.
snmp-server access interface vlan
Supported on: Wi² AP
snmp-server access interface vlan <name>
Enables access to SNMP via the specified VLAN.
no snmp-server access interface vlan <name>
Disables access to SNMP via the specified VLAN.
Parameters
Specifies the name of the VLAN.
<name>
snmp-server access local mesh
Supported on: Wi² AP
snmp-server access local mesh <profile>
Enables access to SNMP via the specified local mesh.
no snmp-server access local mesh <profile>
Enables access to SNMP via the specified local mesh.
snmp-server access interface gre
Supported on: Wi² AP
snmp-server access interface gre <name>
Enables access to SNMP via the specified GRE tunnel.
no snmp-server access interface gre <name>
Removes access to SNMP via the specified GRE tunnel.
snmp-server access wireless
Supported on: Wi² AP
snmp-server access wireless
Enables SNMP access on the wireless port.
no snmp-server access wireless
Blocks SNMP access on the wireless port.
snmp-server access port-2
Supported on: MWi² AP
snmp-server access port-2
Enables SNMP access on the upstream port.
34
Wi² AP CLI Reference Guide