Service-Sensor; Service-Sensor Poll; Service-Sensor Retry; Service-Sensor Timeout - Alvarion Wi² AP CLI Reference Manual

service-sensor

Supported on: Wi² AP
service-sensor (gateway | address<ip address>)
Sets the target device the service sensor will poll. This can be the default
gateway or a specific IP address.
no service-sensor
Disables the service sensor.
Parameters
gateway
address
<ip address>

service-sensor poll

Supported on: Wi² AP
service-sensor poll <seconds>
Sets the poll frequency.
Parameters
<seconds>

service-sensor retry

Supported on: Wi² AP
service-sensor retry <retries>
Specify how many retries the service sensor will attempt when polling the
target device.
When the retry limit is reached, the radio on the Wi² AP is turned off.
Parameters
<retires>

service-sensor timeout

Supported on: Wi² AP
service-sensor timeout <seconds>
Sets how long the service sensor will wait for a response to a poll before
timing out.
Parameters
<seconds>
Wi² AP CLI Reference Guide
The service sensor will poll the default gateway.
The service sensor will poll another device.
IP address of the other device. For example:
192.168.10.10
Poll frequency. Range: 1 - 3600 seconds.
Number of retries. Range: 0 - 100.
Length of timeout. Range: 1 - 5 seconds.
Config Context
43