Table of Contents
Advertisement
Config Context
dot11 igmp snooping-helper
Supported on: Wi² AP
dot11 igmp snooping-helper
Enables IGMP snooping helpers which ensure that the Wi² AP correctly
delivers multicast packets to roaming client stations that are part of a
multicast group.
no dot11 igmp snooping-helper
Disable IGMP snooping helpers.
discovery protocol
Supported on: Wi² AP
discovery protocol
Enables broadcast of Alvarion device information for interoperability with
CDP-enabled networking hardware.
no discovery protocol
Disable broadcast of Alvarion device information.
discovery protocol device-id
Supported on: Wi² AP
discovery protocol device-id <name>
Overwrite the device-id field of information packets (the Wi² AP serial
number is not used).
no discovery protocol device-id
Do not overwrite the device-id field of information packets (use the Wi² AP
serial number).
bridge priority
Supported on: Wi² AP
bridge priority <number>
Sets the bridge priority for the spanning tree.
The spanning tree uses the bridge ID to elect the root bridge and the
designated bridges. The bridge ID is built with the MAC address of the bridge
and the bridge priority. The first 2 most significant bytes are the bridge
priority and the next 6 bytes are the MAC address. To control which bridge
will become the root bridge, you can configure the bridge priority parameter
on the bridges. The root will be the bridge with the lowest bridge ID. The
Bridge priority has a valid range of 0 to 0xFFFF. The default value is the
middle value: 0x8000.
Wi² AP CLI Reference Guide
47
Advertisement
Table of Contents
