Chapter 2 - CLI Commands
Parameters
VLAN ID. Range: 1 - 4094.
<id>
accept forced links
Supported on: Wi² AP
accept forced links
May accept master orders for selection.
no accept forced links
ignore master orders for selection.
allowed downtime
Supported on: Wi² AP
allowed downtime <number>
Set the allowed downtime for a connection (or a link) to a peer.
dynamic local mesh
Supported on: Wi² AP
dynamic local mesh
Use dynamic local mesh.
no dynamic local mesh
Use static local mesh.
dynamic mode
Supported on: Wi² AP
dynamic mode (master | alt-master | slave)
Selects the dynamic operation mode.
initial discovery time
Supported on: Wi² AP
initial discovery time <number>
Slave: Set the group's initial discovery time in seconds.
mesh id
Supported on: Wi² AP
mesh id <id>
Set the local mesh group id.
82
Wi² AP CLI Reference Guide