Mac Authentication Radius Stationid Delimiter; Mac Authentication; Dot1X Mandatory Authentication; Add Ip Filter - Alvarion Wi² AP CLI Reference Manual

Chapter 2 - CLI Commands

mac authentication radius stationid delimiter

Supported on: Wi² AP
mac authentication radius stationid delimiter (null | colon | dash
| dot | space | comma | under)
Specifies the one-character delimiter that will be used to format both the
calling station ID and the called station ID attributes in RADIUS packets.

mac authentication

Supported on: Wi² AP
mac authentication
Enables support for MAC-based authentication.
no mac authentication
Disable support for MAC-based authentication.

dot1x mandatory authentication

Supported on: Wi² AP
dot1x mandatory authentication
Authentication is mandatory.
no dot1x mandatory authentication
Authentication is not mandatory.

add ip filter

Supported on: Wi² AP
add ip filter <ip address>/<mask>
Adds an IP filter to the list of destination addresses that traffic will be
accepted for. All other traffic will be blocked.
If the list is empty, then all wireless-to-wired LAN traffic is permitted.
Where:
<address>
</mask>

delete ip filter

Supported on: Wi² AP
delete ip filter <ip address>/<mask>
Deletes the specified address from the IP filter list.
If the list is empty, then all wireless-to-wired LAN traffic is permitted.
Where:
<address>
72
IP address.
Subnet mask in CIDR format. Specifies the number of
bits in the mask.
IP address.
Wi² AP CLI Reference Guide