2.2
Enable Context
Context path: View > Enable
This context provides access to various utilities.
reboot device
Supported on: Wi² AP
reboot device
Restarts the system.
show certificate
Supported on: Wi² AP
show certificate
Display current certificates.
show certificate binding
Supported on: Wi² AP
show certificate binding
Display how the certificates are used.
ping
Supported on: Wi² AP
ping <host> [-c <count>] [-s <length>] [-q]
Determines if the specified remote IP address is active.
Parameters
<-c host>
<-c count>
<-s length>
<-q>
arping
Supported on: Wi² AP
arping [ -AbDfhqUV] [ -c <count>] [ -w <deadline>] [ -s <source>]
-I <interface> <destination>
Pings a destination on a device interface using ARP packets.
Wi² AP CLI Reference Guide
The IP address or DNS name of the host to ping.
Number of pings.
Length of the ping datagram.
Quiet mode. No output.
Enable Context
17