2.12
IP_QOS Context
Context path: View > Enable > Config > IP_QOS
This context provides commands for configuring IP QoS profiles.
end
Supported on: Wi² AP
end
Returns to a previous context.
end-port
Supported on: Wi² AP
end-port <number>
Specifies the end port to use for this IP QoS profile.
Parameters
<number>
priority
Supported on: Wi² AP
priority <low | medium | high | very-high>
Sets the priority for this IP QoS profile.
Parameters
<priority>
profile name
Supported on: Wi² AP
profile name <name>
Changes the name of the IP QoS profile.
protocol
Supported on: Wi² AP
protocol <number>
Specifies the protocol ID use for this IP QoS profile.
Parameters
<number>
Wi² AP CLI Reference Guide
End port number. Range: 0 - 65535
Available priorities are: low, medium, high and
very-high.
Protocol number. Range: 0 - 255.
IP_QOS Context
87