Table of Contents
Advertisement
Chapter 2 - CLI Commands
2.14
Syslog Destination Context
Context path: View > Enable > Config > Syslog destination
This context provides commands for configuring Syslog destinations.
active
Supported on: Wi² AP
active
Enables logging to the current destination.
no active
Disables logging to the current destination.
logging facility
Supported on: Wi² AP
logging facility (local0 | local1 | local2 | local3 | local4 |
local5 | local6 | local7)
Sets the facility that is used when logging messages to a syslog server.
Parameters
<facility>
logging host
Supported on: Wi² AP
logging host (tcp | udp) <addr> [<number>]
Sets the remote address, the connection protocol and port of current syslog
remote destination.
logging prefix
Supported on: Wi² AP
logging prefix <string>
Sets the prefix that will be prepended to all syslog messages.
no logging prefix
Removes the prefix that is prepended to all syslog messages.
name
Supported on: Wi² AP
name <name>
Renames the current syslog destination.
90
Available facilities are: local0 - local7.
Wi² AP CLI Reference Guide
Advertisement
Table of Contents
