Wireless Context
station distance
Supported on: Wi² AP
station distance (0km | 5km | 10km | 15km | 20km | 25km | 30km |
35km)
Fine tunes internal timeout settings to account for the distance that
wireless links span. For normal operation, the CNx is optimized for links of
less than 1 km.
This is a global setting that is useful when creating wireless links to remote
sites. However, it also applies to all wireless connection made with the radio,
not just for wireless links. Therefore, if you are also using the radio to serve
local wireless client stations, adjusting this setting may lower the
performance for clients with marginal signal strength or when interference
is present. (Essentially, it means that if a frame needs to be retransmitted it
will take longer before the actual retransmit takes place.)
dot11 mode
Supported on: Wi² AP
dot11 mode (monitor | ap+wds | ap-only | wds-only | sensor)
Sets the operating mode for the radio.
bandwidth
Supported on: Wi² AP
bandwidth
Enables bandwidth control.
no bandwidth
Disables bandwidth control.
bandwidth max
Supported on: Wi² AP
bandwidth max <rate>
Set the maximum data rate on the wireless port in kbps.
Parameters
Maximum data rate. Range: 500 - 54000 kbps.
<rate>
Wi² AP CLI Reference Guide
63