Enable - Alvarion Wi² AP CLI Reference Manual

Chapter 2 - CLI Commands
-q
-Q <cmd>
-r <range>
-R
-s
-S
--stderr <file>
-t <OPT=val>
--trace <file>
--trace-ascii <file>
-T <file>
--url <URL>
-ur <user[:pass]>
-U <user[:pass]>
-v
-V
-w [format]
-x <host[:port]>
--random-file <file>
-X <command>
-y
-Y
-z <time>
-Z <num>
-0
-1
-2
-3

enable

Supported on: Wi² AP
enable
Switches to the enable context.
14
When used as the first parameter disables .curlrc
Specifies to send QUOTE command to FTP before file
transfer. FTP only.
Specifies to retrieve a byte range from a HTTP/1.1 or
FTP server.
Sets the remote file's time on the local output.
Specifies silent mode. Don't output anything.
Specifies show error. With -s, make curl show errors
when they occur.
Specifies where to redirect stderr. - means stdout.
Sets the telnet option.
Dumps a network/debug trace to the given file.
Specifies --trace but without the hex output.
Specifies to transfer/upload <file> to remote site.
Specifies another way to specify URL to work with.
Specifies user and password to use. Overrides -n and
--netrc-optional
Specifies proxy authentication.
Makes the operation more talkative.
Outputs version number then quits.
Specifies what to output after completion.
Specifies to use proxy. (Default port is 1080).
Specifies the file to use for reading random data from
(SSL).
Specifies the request command to use.
Specifies the time needed to trig speed-limit abort.
Defaults to 30.
Specifies to stop transfer if below speed-limit for
'speed-time' secs.
Includes a time condition to the server. HTTP only.
Sets the maximum number of redirections allowed.
HTTP only.
Forces usage of HTTP 1.0. HTTP only.
Forces usage of TLSv1. HTTP only.
Forces usage of SSLv2. HTTP only.
Forces usage of SSLv3. HTTP only.
Wi² AP CLI Reference Guide