Table of Contents
Advertisement
Parameters
<db>
Note: The actual transmit power used may less than the value specified. The
Wi² AP determines the power to used based on the settings you made for
regulatory domain, wireless mode, and operating frequency.
antenna bidirectionnal
Supported on: Wi² AP
antenna bidirectionnal (diversity | main | auxiliary)
Sets the antenna to transmit and receive on. Select diversity to transmit
and receive on both antennas.
Parameters
diversity
main
aux
autochannel skip
Supported on: Wi² AP
autochannel skip <chan>
Adds the specified channel to the list of channels that are not allowed to be
selected by the Auto Channel algorithm.
no autochannel skip <chan>
Removes the specified channel to the list of channels that are not allowed to
be selected by the Auto Channel algorithm.
beacon interval
Supported on: Wi² AP
beacon interval <value>
Sets the beacon interval.
Parameters
< value>
dot11 automatic frequency
Supported on: Wi² AP
dot11 automatic frequency
Enable this option to have the Wi² AP automatically determine the best
operating frequency.
Wi² AP CLI Reference Guide
Power is specified in steps of 1dBm. The maximum
setting is 18 dBm.
In this mode both antennas are used to transmit and
receive. The Wi² AP supports both transmit and receive
diversity.
Transmit and receive on the main antenna only.
Transmit and receive on the aux antenna only.
Beacon interval value in the range 20 and 500 time
units (TU) (1 TU = 1024us).
Wireless Context
61
Advertisement
Table of Contents
