Table of Contents
Advertisement
Chapter 2 - CLI Commands
add wireless ip-qos profile
Supported on: Wi² AP
add wireless ip-qos profile <name>
Adds the specified profile to the list of IP QoS profiles in effect for the
wireless links.
<profile-name>
delete wireless ip-qos profile all
Supported on: Wi² AP
delete wireless ip-qos profile all
Clears the list of IP QoS profiles currently in effect for the wireless links.
delete wireless ip-qos profile
Supported on: Wi² AP
delete wireless ip-qos profile <name>
Removes the specified profile from the list of IP QoS profiles in effect for the
wireless links.
<profile-name>
wireless link qos
Supported on: Wi² AP
wireless link qos (disabled | 802.1p | wme | very-high | high |
normal | low | tos | diffsrv)
Sets the wireless link QoS policy.
sensor discovery mode
Supported on: Wi² AP
sensor discovery mode (id | ip)
Sets the method the Wi² AP will use to communicate with the RF Manager
Server.
Parameters
id
ip
Description
For these methods to work, the following must be true:
• The Wi² AP must be able to reach the RF Manager Server via a network
connected to port 1 or port 2. For example, you should be able to ping the
RF Manager Server‚Äôs IP address from the Wi² AP.
50
Name of an existing IP QoS profile.
Name of an existing IP QoS profile currently in the
profile list for the wireless links.
Connect using the Server ID of the RF Manager Server.
Connect using the IP address or hostname of the RF
Manager Server.
Wi² AP CLI Reference Guide
Advertisement
Table of Contents
