Table of Contents
Advertisement
Chapter 2 - CLI Commands
snmp-server trap wireless-disassociation-success
Supported on: Wi² AP
snmp-server trap wireless-disassociation-success
Send a trap when a wireless client station disassociates from the Wi² AP.
no snmp-server trap wireless-disassociation-success
Do not send this trap.
snmp-server trap wireless-reassociation-fail
Supported on: Wi² AP
snmp-server trap wireless-reassociation-fail
Send a trap when a wireless client station fails to reassociate with the Wi²
AP.
no snmp-server trap wireless-reassociation-fail
Do not send this trap.
snmp-server trap wireless-reassociation-success
Supported on: Wi² AP
snmp-server trap wireless-reassociation-success
Send a trap when a wireless client station reassociates with the Wi² AP.
no snmp-server trap wireless-reassociation-success
Do not send this trap.
snmp-server trap syslog-matches
Supported on: Wi² AP
snmp-server trap syslog-matches
Send a trap when syslog messages matches a specified regular expression.
no snmp-server trap syslog-matches
Do not send this trap.
snmp-server trap syslog-matches regex
Supported on: Wi² AP
snmp-server trap syslog-matches regex <regex>
Sets the regular expression used to match the systlog messages.
snmp-server trap syslog-severity level
Supported on: Wi² AP
snmp-server trap syslog-severity level (debug | info | notice |
warning | error | critical | alert | emergency)
Set the severity level of syslog messages that will trigger a trap.
40
Wi² AP CLI Reference Guide
Advertisement
Table of Contents
