Dot1X Reauth Period; Dot1X Reauth Terminate; Dot1X Supplicant Timeout; Dynamic Key - Alvarion Wi² AP CLI Reference Manual

Config Context

dot1x reauth period

Supported on: Wi² AP
dot1x reauth period (15m | 30m | 1h | 2h | 4h | 8h | 12h)
Sets the 802.1X reauthentication interval. Client stations must
reauthenticate when this interval expires.

dot1x reauth terminate

Supported on: Wi² AP
dot1x reauth terminate
Enable this option to allow client stations to remain connected during
re-authentication. Client traffic is blocked only when re-authentication fails.
no dot1x reauth terminate
Disabled this option to block client traffic during re-authentication and only
activate traffic again if authentication succeeds.

dot1x supplicant timeout

Supported on: Wi² AP
802.1x supplicant time-out <seconds>
Sets the 802.1X supplicant time-out.
Parameters
time-out in seconds.
<seconds>

dynamic key

Supported on: Wi² AP
dynamic key
Enables dynamic key support for 802.1X and WPA.
no dynamic key
Disables dynamic key support for 802.1X and WPA.

dynamic key interval

Supported on: Wi² AP
dynamic key interval (5m | 10m | 15m | 30m | 1h | 2h | 4h | 8h |
12h)
Specifies how often (in minutes or hours) that the group (broadcast) key is
changed for 802.1X and WPA.
Wi² AP CLI Reference Guide 49