Chapter 2 - CLI Commands
2.11
RADIUS Context
Context path: View > Enable > Config > RADIUS
This context provides commands for configuring RADIUS profiles.
end
Supported on: Wi² AP
end
Switches to parent context.
radius-server accounting port
Supported on: Wi² AP
radius-server accounting port <number>
Specifies the port to use for RADIUS accounting.
Parameters
<number>
radius-server alternate hosts
Supported on: Wi² AP
radius-server alternate hosts
Try last answering RADIUS host first.
no radius-server alternate hosts
Try primary RADIUS host first.
radius-server authentication method
Supported on: Wi² AP
radius-server authentication method (mschap | chap | mschapv2 | pap
| eap-md5)
Sets the authentication method to use when communicating with the
RADIUS server.
For 802.1x users, the authentication method is always determined by the
802.1x client software and is not controlled by this setting.
If traffic between the Wi² AP and the RADIUS server is not protected by a
VPN, it is recommended that you use either EAP-MD5 or MSCHAP V2, if
supported by your RADIUS Server. (PAP, MSCHAP V1 and CHAP are less
secure protocols.)
84
Accounting port number. Range: 1 - 65535.
Wi² AP CLI Reference Guide