Aligning The Pro Cpe's Internal Antenna; Su Alignment Unit (Sau) - Alvarion BreezeMAX PRO 5000 CPE Product Manual

Chapter 3 - Commissioning
3.3

Aligning the PRO CPE's Internal Antenna

3.3.1

SU Alignment Unit (SAU)

The miniature SU Alignment Unit can be used during installation and testing to
support an easy process of antenna alignment and provide the ODU's status
indications.
To connect the SAU to the ODU:
Remove the sealing cap of the ODU's SAU connector.
1
Connect the cable attached to the SAU to the SAU connector.
2
After completing the installation, disconnect the cable and replace the cap.
3
Use appropriate sealing material to protect the connection against moisture and
humidity. Use removable sealing material, such as a tar seal, to enable future
access to the connector.
BreezeMAX PRO 5000 CPE
Figure 3-2: SAU
35
Aligning the PRO CPE's Internal Antenna
Product Manual