Clear User Memory - C-more micro EA1-S6ML Hardware User Manual

Chapter 5: System Setup Screens
Setting – Clear User Memory
1 LCD Contrast
2 Backlight
3 Beep
4 Calibration

5 Clear User Memory

6 Reset to Factory Default
5
1 LCD Contrast
2 Backlight
3 Beep
4 Cal bration
5 Clear User Memory
6 Reset to Factory Default
BAK NXT
Setting – Reset to Factory Default
1 LCD Contrast
2 Backlight
3 Beep
4 Calibration
5 Clear User Memory
6 Reset to Factory Default
The Factory Default values are:
• LCD Contrast value of 8
• Green backlight color for EA1-S6ML, white backlight color for EA1-S6MLW
• The internal audible beeper enabled
• Forced touch panel calibration
• User program cleared from memory
• Hourglass icon delay of 350 ms.
• Horizontal orientation
NOTE: User memory is cleared when factory defaults are reset. Use the C-more Micro-Graphic
programming software to read the program from the panel iand save a backup copy.
5–12
BAK
SETTING
NXT
>
>
>
UP
>
DWN
ENT
ENT
SETTING
>
>
>
>
ENT
DWN ENT
UP
BAK
SETTING
NXT
>
>
>
UP
>
DWN
ENT
ENT
® EA1-MG6-USER-M Hardware User Manual, 1st Ed. Rev C, 09/10
With Clear User
Memory
highlighted, press
ENT [F5]. You will
be given the choice
to either proceed
with clearing the
user memory by
pressing [F5] for
YES or allowed to
cancel by pressing
[F1] for NO.
With Reset to
Factory Default
highlighted, press
ENT [F5]. Press [F5]
to restore all settings
to factory defaults
and clear user
memory. Press [F1] to
cancel.
BAK
SETTING
NXT
Are you sure you
want to clear
UP
memory?
No[F1] / Yes[F5]
DWN
ENT
ENT
SETTING
Are you sure you
want to clear
memory?
No[F1] / Yes[F5]
ENT
BAK NXT
UP DWN ENT
BAK
SETTING
NXT
Are you sure you
want to clear
UP
memory?
No[F1] / Yes[F5]
DWN
ENT
ENT