Omron Host Link Protocol - Plc Error Code Table - C-more micro EA1-S6ML Hardware User Manual

Appendix A: Panel & PLC Error Code Tables
Omron Host Link Protocol – PLC Error Code Table
A
The following table lists the errors that can be generated by the Omron PLC when using the
Host Link protocol.
Note: The following errors can be generated from the designated PLC, are monitored by the C-more Micro-
Graphic panel, and displayed on the panel's screen as a hexadecimal value in panel error code P499, if active.
Please refer to the PLC manufacturer's documentation for additional information.
Panel Error Code
P499 Hex Value
0x00
0x01
0x02
0x03
0x04
0x0B
0x0C
0x0D
0x10
0x11
0x12
0x13
0x14
0x15
0x16
0x18
0x19
0x20
0xA0
0xA1
0xA2
0xA3
0xA4
0xA5
0xA8
0xB0
A–24
PLC Error Codes for Omron Host Link
Normal Completion.
Not executable in RUN mode.
Not executable in MONITOR mode.
Not executable with PROM mounted.
Address over (data overflow).
Not executable in PROGRAM mode.
Not executable in DEBUG mode.
Not executable in LOCAL mode.
Parity error.
Framing error.
Overrun.
FCS error.
Format error (parameter length error).
Entry number data error (parameter error, data code error, data length error).
Instruction not found.
Frame length error.
Not executable (due to Un-executable error clear, non-registration of I/O table, etc.).
I/O table generation impossible (unrecognized remote I/O unit, channel over, duplication of optical
transmitting I/O unit).
Abort due to parity error in transmit data under process.
Abort due to framing error in transmit data under process.
Abort due to overrun in transmit data under process.
Abort due to FCS error in transmit data under process.
Abort due to format error in transmit data under process.
Abort due to frame length error in transmit data under process.
Abort due to entry number data error in transmit data under process.
Un-executable due to program area capacity other than 16k bytes.
® EA1-MG6-USER-M Hardware User Manual, 1st Ed. Rev C, 09/10
Description