Omron Fins Protocol - Plc Error Code Table - C-more micro EA1-S6ML Hardware User Manual

Appendix A: Panel & PLC Error Code Tables
Omron FINS Protocol – PLC Error Code Table (cont'd)
A
Panel Error Code
P499 Hex Value
0x1104
0x1106
0x1109
0x110A
0x110B
0x110C
0x2002
0x2003
0x2004
0x2005
0x2006
0x2007
0x2101
0x2102
0x2103
0x2105
0x2106
0x2107
0x2108
0x2201
0x2202
0x2203
0x2204
0x2205
0x2206
0x2207
0x2208
0x2301
0x2302
0x2303
0x2401
0x2502
0x2503
0x2504
0x2505
0x2506
(PLC generated error codes for the Omron FINS protocol continued on the next page.)
A–26
PLC Error Codes for Omron FINS
Parameter Error: Address range exceeded.
Parameter Error: Program Missing.
Parameter Error: Relational Error.
Parameter Error: Duplicate Data Access.
Parameter Error: Response too long.
Parameter Error: Parameter Error.
Read Not Possible: Protected.
Read Not Possible: Table missing.
Read Not Possible: Data missing.
Read Not Possible: Program missing.
Read Not Possible: File missing.
Read Not Possible: Data mismatch.
Write Not Possible: Read Only.
Write Not Possible: Protected - cannot write data link table.
Write Not Possible: Cannot register.
Write Not Possible: Program missing.
Write Not Possible: File missing.
Write Not Possible: File name already exists.
Write Not Possible: Cannot change.
Not executable in current mode: Not possible during execution.
Not executable in current mode: Not possible while running.
Not executable in current mode: Wrong PLC mode (Program).
Not executable in current mode: Wrong PLC mode (Debug).
Not executable in current mode: Wrong PLC mode (Monitor).
Not executable in current mode: Wrong PLC mode (Run).
Not executable in current mode: Specified node not polling node.
Not executable in current mode: Step cannot be executed.
No such device: File device missing.
No such device: Missing memory.
No such device: Clock missing.
Cannot Start/Stop: Table missing.
Unit Error: Memory Error.
Unit Error: I/O setting Error.
Unit Error: Too many I/O points.
Unit Error: CPU bus error.
Unit Error: I/O Duplication.
® EA1-MG6-USER-M Hardware User Manual, 1st Ed. Rev C, 09/10
Description