Allen-Bradley Df1 Protocol - Plc Error Code Tables - C-more micro EA1-S6ML Hardware User Manual

Appendix A: Panel & PLC Error Code Tables
Allen-Bradley DF1 Protocol – PLC Error Code Tables (cont'd)
A
PLC Errors for Allen-Bradley DF1 Protocol, EXT STS Command Code for F0 Command
Panel Error Code
P499 Hex Value
0x0
0x1
0x2
0x3
0x4
0x5
0x6
0x7
0x8
0x9
0xA
0xB
0xC
0xD
0xE
0xF
0x10
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
0x19
0x22
0x23
0x24
0x1A
0x1B
0x1C
0x1D
0x1E
0x1F
A–8
not used
A field has an illegal value.
Fewer levels specified in address than minimum for any address.
More levels specified in address than system supports.
Symbol not found.
Symbol is of improper format.
Address does not point to something usable.
File is wrong size.
Cannot complete request; situation has changed since start of the command.
Data or file size is too large.
Transaction size plus word address is too large.
Access denied; improper privilege.
Condition cannot be generated; resource is not available.
Condition already exists; resource is readily available.
Command cannot be executed.
Histogram overflow.
No access.
Illegal data type.
Invalid parameter or invalid data.
Address reference exists to deleted area.
Command execution failure for unknown reason;
possible PLC 3 histogram overflow.
Data conversion error.
Scanner not able to communicate with 1771 rack adapter.
Type mismatch.
1771 module response was not valid.
Duplicated label.
Remote rack fault.
Timeout.
Unknown error.
File is open; another node owns it.
Another node is the program owner.
Reserved
Reserved
Data table element protection violation.
Temporary internal problem.
® EA1-MG6-USER-M Hardware User Manual, 1st Ed. Rev C, 09/10
Description