Customizing the Function Keys Insert Label
Step 1 - Remove existing
function key label insert
using a small tool such as
jeweler's screw driver.
0.563
[14.3]
0.282
[7.15]
®
Step 2 - Remove the
protective film from the
blank key label insert.
0.709
[18.0]
Typical
EA1-MG6-USER-M Hardware User Manual, 1st Ed. Rev C, 09/10
Chapter 9: Replacement Parts
Step 3 - If desired, print and
apply self adhesive labels to
the blank insert.
Step 4 - Install the new insert
into the slot in the side of the
panel and lock tab into place.
4.803
[122.0]
Units: inches [mm]
9
9–3