Replacement Of The High Density Dust Filter - Barco HDX 4K Series User Manual
Hide thumbs
Also See for HDX 4K Series:
- User manual (170 pages) ,
- Quick start manual (6 pages) ,
- User manual (258 pages)
Table of Contents
Advertisement
Servicing
How to install
1.
Take the lamp house by its handles and gently slide the lamp house into its socket. Note that the compartment
is provided with a guide (1) to position the lamp house correctly.
3
2
3
Image 17-9: Insert lamp house
2.
Push the lamp house forward until it slides fully into the projector.
Positioning pins (2) must match the holes (5) in the lamp house.
3.
Secure this position by fastening the 3 spring lock screws.
4.
Reinstall the lamp cover of the projector.
While starting up the projector, the electronics detect if a lamp is installed. If no lamp is installed, it is
not possible to start up the projector.
17.7 Replacement of the high density dust filter
CAUTION: The high density filter must be replaced on a regular basis, depending on the
environment conditions of the projector.
WARNING: Switch off the projector and unplug the power cord before starting the procedure.
180
R5906070-11
HDX 4K
2
1
3
2
1
4
4
5
6
Advertisement
Table of Contents
