Replacement Of The Dust Filter On The Front Side - Barco HDF W22 Installation Manual

17.2 Replacement of the dust filter on the front side
Necessary parts
New HEPA dust filter for the front side (R9854470).
How to replace the HEPA dust filter on the front side
1. Remove the front cover of the projector, see "Removal of the front cover", page 324.
2. Remove the HEPA dust filter on the front side by pulling the two spring clamps away from the filter and then moving the filter
forwards.
Image 17-3
Front filter
3. Insert a new HEPA
Caution: Make sure that the airflow indicated on the dust filter match with the airflow of the fans.
4. Reinstall the front cover of the projector, see "Installation of the front cover", page 328.
C
AUTION
1. High Efficiency Particulate Arrestant
R5905158 HDF W SERIES 01/06/2012
1
1
filter by pulling the two spring clamps away and move the filter into position.
:
Never install a used HEPA filter. Always install a new HEPA filter.
2
17. Servicing
335