Auto Dimming - Barco HDF W22 User And Installation Manual

8.7.5

Auto Dimming

About auto dimming
When no signal is detected on the selected input the lamp power will be reduced from the current value to its minimum value. When
the input signal is re-detected, the lamp power is restored to its original value.
How to set up
1. Press Menu to activate the menus and select Input → No Signal. → Auto Dimming.
Image 8-36
Main menu
Image 8-38
No signal, auto dimming
2. Press ENTER to toggle between [On] or [Off].
[On] : when no signal, auto dimming is started.
[Off] : when no signal, no auto dimming is started.
R5905158 HDF SERIES 08/12/2016
Image 8-37
Input, no signal
8. Input
121