Table of Contents
Advertisement
Auto Search
All channel information will be overwritten and the channel list will
The projector scans the entire VHF and UHF band for the available TV frequencies. It starts in the lower frequency range and
it stores each found frequency in another preselection in a consecutive order. It takes around 2 to 3 minutes to complete the
entire TV spectrum.
To start auto search, push the control disc up or down to select the
A warning will be displayed that all information will be overwritten.
Press ENTER to confirm and to start up the auto search action.
When the first frequency is found, the auto search menu with the frequency and the preselection indication will be displayed.
While this menu is visible, a projector will execute a small fine tuning for that channel.
When the entire TV spectrum is finished, the projector goes back to the beginning of the TV spectrum and when the first identical
source is found, it stops.
It is possible to reorganise the channel list to your wishes and to add additional information to the channel list. See 'ORGANISE
CHANNEL LIST'.
ORGANISE CHANNEL LIST
Manual Search
The desired channels can be search manually.
Highlight 'MANUAL SEARCH' by pushing the control disc up or down and press ENTER to display the manual search menu.
The last selected source will be displayed.
Push the control disc up or down to select the next available frequency.
it stops and displays the frequency.
Fine tuning is possible by pushing the control disc to the right or to the left.
The preselection indication will be blinking on the next available preselection number. If this preselection is ok, press ENTER to
store the displayed image in that program location.
numeric keys and press ENTER to store the displayed image in that program location.
Press EXIT to return to the 'Tuner Setup' menu.
R5976381.01 BARCO CINE6 31012002 _________________________________________________________________________
TUNER SETUP
SYSTEM : B/G
AUTO SEARCH
MANUAL SEARCH
AUTO SEARCH
Select with
or
then <ENTER>
<EXIT> to return.
All channel information will
be overwritten !
The channel list will be
reorganised completely !
<ENTER> to confirm
<EXIT> to cancel
TUNER SETUP
SYSTEM : B/G
ORGANISE CHANNEL LIST
MANUAL SEARCH
AUTO SEARCH
Select with
then <ENTER>
<EXIT> to return.
be reorganised completely.
'Auto Search' function and press ENTER to select.
AUTO SEARCH
CHANNEL FREQUENCY :
X X X, X X X MHz
PRESELECTION : 1
When a channel frequency is found,
If another preselection is desired, press the corresponding digits with the
MANUAL SEARCH
CHANNEL FREQUENCY :
or
X X X, X X X MHz
PRESELECTION : 1
Use
or
to search
or
for fine tuning.
Program the preselection
with numeric keys, then
<ENTER> to store
Press <EXIT> to return.
Tuner Mode
A-3
Advertisement
Table of Contents
