Configuring Video And Camera Settings; Hdmi Connections - Polycom G7500 Administrator's Manual

Configuring Video and Camera Settings

Topics:
▪

HDMI Connections

▪ Configure Monitor Settings
▪ Configure a Touch Monitor
▪ Configure Camera Settings
▪ Configure Video Input Settings
▪ Video Codec Capabilities
You can configure video settings for your G7500 system, including monitors and cameras.
Use the HDMI input resolutions and video codec capabilities to further enhance your video experience,
based on your deployment requirements.
HDMI Connections
Your G7500 system has three HDMI ports so you can have dual monitors and an HDMI content source.
Your system has the following HDMI connections:
▪ Output for connecting the primary system monitor (Monitor 1)
▪ Output for connecting the secondary system monitor (Monitor 2)
▪ Input for content sharing, including audio streaming
The system supports only HDMI-to-HDMI connections and doesn't support display conversions, such as
VGA-to-HDMI or HDMI-to-DVI cable converters.
Note: Polycom claims no responsibility or liability for the quality, performance, or reliability of third-
party HDMI cables, HDMI splitters, or HDMI USB adapters. Contact your Polycom distributor
or representative to order parts that meet the appropriate manufacturing tolerances, quality,
and performance parameters for your deployment.
Related Links
System Back Panel Ports
Supported HDMI Output Resolutions for Single-Monitor Setups
Your G7500 system supports the following HDMI output resolutions and frame rates when using one
monitor.
Supported HDMI Output Resolutions and Frame Rates for Single-Monitor Setups
Output
UHD (4K)
Polycom, Inc.
on page 10
Resolution
3840 × 2160p
Frame Rates (fps)
25, 30, 50, 60
76