Table of Contents
Advertisement
Quick Test for Remote Video
Software for the Remote Operation of Rapid Eye LT DVRs
Checklist for Admin Software
Document 800-07766V1 Rev A
02/11
This chapter describes how to perform a quick test to confirm that all the hardware and
software is working and video is being received from DVRs at remote sites.
Your organization's Multi SA may need to establish that video can be obtained on an
operator PC, after
Testing a Network Connection in the
Field, page 36.
Connection in the
It is useful to establish that the hardware and software installations are in good working
order before securing the system with passwords, user accounts, and so on.
Figure 3-1
Desktop Icon for the Admin Application
Refer to the
Rapid Eye™ Multi-Media Digital Video Recorder System Administrator
about using the Admin application to:
•
Open the ports in your organization's firewall that are needed by Rapid Eye. See
Reference, page 43.
Firewall
•
Install Rapid Eye Multi-Media LT (REM) software. How to install and use Rapid Eye
software by Honeywell is explained in the
Recorder System Administrator
After installing Rapid Eye software, documentation about Rapid Eye Multi-Media LT is
available at the operator PC. Click Start
LT x.x
Documentation
view).
•
Create and log on to an empty Multi-Media LT central database.
Field, page 35, or
Rapid Eye™ Multi-Media Digital Video
Guide.
All Programs
publication title (choose the document you want to
3
Testing a Dial-Up
Guide,
Rapid Eye Multi-Media
39
Advertisement
Table of Contents
