Reset Password - Honeywell HRHT4041 User Manual

the future, input the security code you got on the assigned email to reset the password of
admin. If you have not input email here or you need to update the email information, go
to the Main Menu->Setting->System->Account to set.
You can use the email you input here or answer the security questions to reset admin
password. Refer to
Deselect the email box and then click Next button to skip this step.
6. Set security questions.
Security question: Set security questions and corresponding answers. Properly answer
the questions to reset admin password. In case you have not input security question here
or you need to update the security question information, go to the Main menu->Setting-
>System->Account to set.
Deselect the security questions box and then click Next button to skip this step.
7. Click Save to complete the device initialization setup.

Reset Password

If you forgot admin login password, there are two ways for you to reset password.
• When password reset function is enabled, scan the QR code on the user interface and
use the email to reset password.
• When the password reset function is disabled, answer the security questions to reset
password. If you have not set security questions, system pops up "Password reset
function has been disabled" dialogue box, please use the reset button on the mainboard
to restore factory default settings.
Steps:
1. Go to the device login interface. See
• If you have set unlock pattern, device displays unlock pattern login interface.
See
• If you have not set unlock pattern, device displays password interface. See
Figure
Note
Reset Password
Figure 2-5. Click "Forgot unlock pattern", device goes to
2-6.
Click Switch User button in
and then then select a user from the dropdown list, you can login via other
account.
on page 15 for detailed information.
Figure 2-5 or Figure
Figure 2-5 or click the user name in
Getting Started
2-6. .
Figure 2-6.
Figure 2-6
15