Temperature; Response Schedule; Point-Of-Sale Hardware; Figure 5-6 Serial Ports For Pos - Honeywell Rapid Eye Hybrid LT Installation Manual

Temperature

Response Schedule

Point-of-Sale Hardware

Serial Ports
1 and 2
Document 800-07766V4 Rev A
01/2013
A Rapid Eye Hybrid LT DVR can be operated in a non-condensing environment, in
temperatures ranging from 40°F to 104°F (or 5°C to 40°C).
Caution Excessive heat (above 104°F) will shut down the DVR.
Vandalism
One can add rules to trigger an output if video recording fails due to a cut cable, dead
camera or other failure that is not related to DVR performance. Consult the
Hybrid HD and Hybrid LT Digital Video Recorders System Administrator
Response Schedule section.
Connect a point-of-sale (POS) device or other data communication equipment to any of:
SERIAL PORTs 1 to 2 Use RS232 connectors (see
SERIAL PORTs 3 to 4 Use RS485 connectors (see
Figure 5-6 Serial Ports For POS
SPOT
MONITOR
1 2 3 4
VIDEO
INPUTS
SERIAL PORT 2
SERIAL PORT 1 VGA
Rapid Eye™ Hybrid LT DVR Installation Guide
Figure
Figure
COMMON
SYS FAIL
SYS GOOD
FAULT
RELAY
5 6 7 8 28V, 3A
MAX
1 G 2 G 3
ALARM
TELCO
LAN
IN
OUT
115-230V~
50/60 Hz
NOT
5-3A
USED
USB USB
Rapid Eye™
Guide, in the
5-6).
5-6).
CONTROL
Serial Ports
OUTPUTS SERIAL
1 G 2 G 3 G 4 G
PORT 3
3 and 4
SERIAL
PORT 4
G 4 G 5 G 6 G 7 G 8 G
INPUTS
ON/OFF
POWER
63