Stand Mode Triggered Timeout - Datalogic Heron HD3130 Product Reference Manual

Reading Parameters

Stand Mode Triggered Timeout

This feature specifies the time to remain in "Trigger Single" mode after the trig-
ger is pulled while in "Stand Mode".
$CSNOT01
Stand Mode Triggered Timeout = 0.5 Seconds
$CSNOT04
Stand Mode Triggered Timeout = 2 Seconds
DEFAULT
$CSNOT08
Stand Mode Triggered Timeout = 4 Seconds
Product Reference Guide
This timeout is only used when the Scan Mode is configured as Stand
Mode.
NOTE



Enter/Exit Programming Mode
$CSNOT03 
Stand Mode Triggered Timeout = 1.5 Seconds
$CSNOT06 
Stand Mode Triggered Timeout = 3 Seconds
$CSNOT0C 
Stand Mode Triggered Timeout = 6 Seconds
81