Stand Mode Triggered Timeout - Datalogic Powerscan PD7100 Product Reference Manual

Stand Mode Triggered Timeout

This feature specifies the time to remain in
while in
Stand Mode Triggered Timeout = 0.5 Seconds
Stand Mode Triggered Timeout = 2 Seconds
Stand Mode Triggered Timeout = 4 Seconds
Product Reference Guide
Stand Mode.
This timeout is only used when the Scan Mode is configured as
Mode.
NOTE
ENTER/EXIT PROGRAMMING MODE
mode after the trigger is pulled
Trigger Single
DEFAULT
Stand Mode Triggered Timeout = 1.5 Seconds
Stand Mode Triggered Timeout = 3 Seconds
Scanning Features
Stand
33