Scanning Features
Stand Mode Triggered Timeout
This feature specifies the time to remain in
in
Stand
Stand Mode Triggered Timeout = 0.5 Seconds
Stand Mode Triggered Timeout = 2 Seconds
Stand Mode Triggered Timeout = 4 Seconds
102
Mode.
This timeout is only used when the Scan Mode is configured as Stand Mode.
This feature is not applicable to the Gryphon L model.
ENTER/EXIT PROGRAMMING MODE
Trigger Single
mode after the trigger is pulled while
DEFAULT
Stand Mode Triggered Timeout = 1.5 Seconds
Stand Mode Triggered Timeout = 3 Seconds
Stand Mode Triggered Timeout = 6 Seconds
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300