Stand Mode Triggered Timeout - Datalogic Touch 90 pro Product Reference Manual

Scanning Features

Stand Mode Triggered Timeout

This feature specifies the time to remain in
in Stand
NOTE
$CSNOT01
Stand Mode Triggered Timeout = 0.5 Seconds
$CSNOT04
Stand Mode Triggered Timeout = 2 Seconds
DEFAULT
$CSNOT08
Stand Mode Triggered Timeout = 4 Seconds
Product Reference Guide
Mode.
This timeout is only used when the Scan Mode is configured as
.
Mode



Enter/Exit Programming Mode
Trigger Single mode after the trigger is pulled while
$CSNOT03
Stand Mode Triggered Timeout = 1.5 Seconds
$CSNOT06
Stand Mode Triggered Timeout = 3 Seconds
Stand


81