Event Setup - Eneo DIR-4108H Series Operating Instructions Manual

Operating Instructions
: Adds a schedule item. Up to 20 schedules can be registered.
No. – Indicates a schedule number. The higher the number, the higher its priority.
Day – Select the days that the recording will take place.
Range – Set the time range that the recording will take place.
Mode – Select the recording mode. ( : Time (Time-lapse) recording,
Channels – Select which cameras will be recorded.
Settings – Set the ips, Quality and Dwell of the recording for the selected recording mode in the Mode column. If you do
not set the Settings column, the DVR will follow the default settings. See below for details.
– Deletes the recording settings.
Default: Set the default settings of ips, Quality and Dwell for Time and Event recording.

EVENT SETUP

Motion Event Settings (EVENT
No.: Your DVR has built-in motion detection. Selecting the box turns the motion detection On and Off for each camera.
Sensitivity: Set the DVR's sensitivity to motion for Daytime and Nighttime independently from 1 (the least sensitive)
to 5 (the most sensitive).
20
Motion Tab)
: Event recording, : Time & Event recording)